Hornady 22 CAL .224 88 GR ELD MATCH Projectile - 100pk
Hornady 22 CAL .224 88 GR ELD MATCH Projectile - 100pk
- Calibre: .22 CAL
- Bullet Diameter: .224
- Grain Weight: 88 GR
- Product Line: ELD® Match
- Sectional Density: .251
- Ballistic Coefficient G1: .545
- Ballistic Coefficient G7: .274
- Minimum Recommended Twist Rate: 1-7"
- Box Count: 100
- Item Number: 22834
- Bullet Length: 1.245"
When it comes to precision reloading for long-range target and competition shooting, projectile consistency is everything. The Hornady 22 CAL .224 88 GR ELD Match Projectile - 100pk is built from the ground up to deliver match-grade accuracy at extended distances, backed by real Doppler radar-measured ballistic data rather than manufacturer estimates. At 88 grains, this is one of the heavier .224 projectiles available, offering an impressive G1 ballistic coefficient of .545 and G7 of .274, which translates to a flatter trajectory, reduced wind drift, and superior retained energy past 400 yards and well beyond. This is a serious projectile for serious shooters who reload their own ammunition and demand absolute consistency from their components.
Hornady 22 CAL .224 88 GR ELD Match Projectile - 100pk Key Features
- Heat Shield® Tip Technology: Standard polymer tips deform under aerodynamic heating in flight, which alters the meplat and degrades BC consistency at range. Hornady's Heat Shield® Tip is engineered to resist this deformation, maintaining a perfect, consistent meplat from muzzle to target for reliable ballistic performance shot after shot.
- Ballistic Coefficients (Doppler Radar Verified): G1 BC of .545 and G7 BC of .274, measured using Doppler radar and corrected to standard atmospheric conditions. These are real-world figures, not theoretical values, giving handloaders accurate data for load development and ballistic solution inputs.
- AMP® Bullet Jackets: Advanced Manufacturing Process (AMP) jackets feature near-zero variation in wall thickness, producing unprecedented concentricity and uniformity. This directly reduces in-bore distortion and contributes to tighter groups downrange.
- Streamlined Secant Ogive and Optimised Boattail: The bullet's secant ogive profile is designed for a high BC while the optimised boattail base reduces base drag and stabilises the projectile as it transitions to supersonic and transonic flight, supporting consistent accuracy at long range.
- DVRT™ (Drag Variability Reduction Technology): Hornady's patented DVRT™ technology increases drag uniformity across the bullet's surface, reducing dispersion and producing smaller groups at extended distances. This is particularly relevant for competitive shooting where consistency across a full box matters.
- Precision Swaged Lead Core: The lead core is swaged to tight tolerances for consistent weight and density distribution across the projectile, contributing to uniform ballistics and aerodynamic stability, especially important at the extended ranges this bullet is designed for.
- Bullet Diameter and Length: .224" (5.69mm) diameter with a bullet length of 1.245" (31.62mm). At this length, a minimum recommended barrel twist rate of 1-7" (1 turn in 177.8mm) is required to achieve adequate stabilisation.
- Sectional Density: .251 sectional density reflects the bullet's mass relative to its cross-sectional area, supporting good retained velocity and trajectory efficiency over distance.
- Pack Quantity: Supplied in a box of 100 projectiles, suitable for a meaningful volume of load development and range sessions without the per-projectile cost of smaller packs.
The Hornady ELD Match 88 GR .224 is a purpose-built long-range match projectile that suits handloaders shooting precision rifle disciplines, whether at the range or in competition. Pair it with a barrel featuring at least a 1-7" twist to get the best out of this heavy-for-calibre, high-BC bullet.
What twist rate do I need to stabilise the Hornady 88gr ELD Match .224 projectile?
You'll need a minimum barrel twist rate of 1-7" to properly stabilise this projectile. Given the 88gr bullet's length of 1.245" and its heavier-for-calibre design, a faster twist is essential for consistent accuracy at long range. Rifles with slower twist rates common on lighter .224 builds may not stabilise this bullet reliably.
What makes the Heat Shield® Tip on the ELD Match different from a standard polymer tip?
Standard polymer tips can deform from aerodynamic heating during flight, which changes the bullet's ballistic profile mid-trajectory. Hornady's Heat Shield® Tip is engineered to resist that heat, maintaining a consistent meplat shape from muzzle to target. This preserves the bullet's advertised ballistic coefficients and helps deliver predictable, repeatable accuracy at extended ranges.
What are the ballistic coefficients for the Hornady 88gr ELD Match .224, and how are they measured?
This projectile has a G1 BC of .545 and a G7 BC of .274, both measured using Doppler radar and corrected to standard atmospheric conditions. Doppler radar measurement is significantly more precise than traditional methods, giving reloaders highly reliable data for long-range load development and ballistic calculations.
How many projectiles come in a box, and what shooting applications are they designed for?
Each box contains 100 projectiles. The 88gr ELD Match is designed specifically for target shooting and competitive environments, with features like AMP® bullet jackets, a precision swaged lead core, and DVRT™ technology optimised for long-range accuracy beyond 400 yards. It is not a hunting projectile — it's built for match and precision shooting.
Check These Products Out
Recommended add-ons and related products.
Hornady Series I 223 REM (.224)
$119.99
Unleash the potential of your reloading bench with the Hornady Series I 223 REM (.224) die set. These dies are crafted with precision and attention to detail, ensuring smoother functioning and easier adjustments. The Zip Spindle® design eliminates slippage, while the polished internal finish prevents case sticking. The Sure-Loc® lock rings provide consistent pressure, and the elliptical expander reduces friction. With an in-line bullet seating system and built-in crimper, this die set is perfect for achieving benchrest precision. Organize your tools effortlessly with the easy access die boxes.
Hornady Series I 223 REM (.224) Features:
- Zip Spindle™ Design: The Zip Spindle™ design on all full length size dies positively locks to eliminate slippage. A series of light threads cut on both the spindle and spindle collet allows you to make incremental adjustments by turning the spindle or you can easily "zip it" up or down for larger movements.
- Smooth Finish: Internal die profile is precision machined and polished to a smooth finish that delivers reliable functioning without case sticking or excessive friction.
- Lock Rings with Wrench Flats: The Hornady Sure-Loc® lock rings clamp around the entire die applying constant pressure across the threads to hold the ring in place. The locking screw tightens the ring without ever coming into contact with the threads, eliminating possible damage from pliers.
- Elliptical Expander: Superior to "ball expanders," this Hornady exclusive provides extremely smooth neck sizing and significantly reduces friction and case neck stretch. Internal threading prevents it from pulling loose and the elliptical expander also eliminates the need for a separate expander die for necking-up to the next calibre.
- In-line Bullet Seating System: Our seating system holds the bullet, the case neck and the seating stem in perfect alignment in the sleeve BEFORE the bullet enters the neck of the case. The system includes a floating bullet alignment sleeve, a floating steel seating stem and a built-in crimper for benchrest precision. Bullets are aligned in the sleeve as they enter the die for optimum seating and enhanced accuracy.
Hornady Neck Sizing Die - .22 Cal (.224)
$99.99
For handloaders who shoot bolt-action or single-shot rifles and want to extend case life while squeezing every bit of accuracy out of their handloads, the Hornady Neck Sizing Die - .22 Cal (.224) is a precision-engineered solution that works only the case neck rather than the entire case body. By leaving the case body fire-formed to your chamber, neck sizing reduces brass fatigue significantly, giving you more reloading cycles per case compared to full-length sizing. The die is compatible with a broad range of popular .224 diameter cartridges including .221 Rem Fireball, .222 Rem, .223 Rem, .222 Rem Mag, 5.6x50 Mag, .219 Zipper, .224 Wby Mag, .225 Win, and .22-250 Rem, making it a versatile addition to any reloading bench. It is important to note that neck-sized cases should only be fired in the bolt-action or single-shot rifle they were formed in, as the case body is not resized to SAAMI minimum dimensions and may not chamber reliably in a different firearm.
Hornady Neck Sizing Die - .22 Cal (.224) Key Features
- Neck Sizing Only: Resizes only the case neck rather than the full case body, reducing brass work-hardening, extending case life, and improving dimensional consistency from reload to reload. Suitable for bolt-action and single-shot rifles only.
- Integrated Elliptical Expander: The elliptical expander ball geometry reduces friction and case neck stretch compared to a conventional round ball expander, resulting in more consistent neck tension and less stress on the brass during sizing.
- Precision Machined Internal Profile: The interior of the die is precision machined and polished to a smooth finish, minimising friction and virtually eliminating case sticking during the sizing stroke.
- Zip Spindle Design: The Zip Spindle system positively locks the spindle in place under load, preventing slippage or movement during the press stroke for consistent, repeatable bullet seating depth.
- Sure-Loc Lock Rings: Hornady's Sure-Loc lock rings clamp around the full circumference of the die body, applying even pressure across all threads to hold the ring firmly at your set position without requiring a jam nut.
- Hardened Steel Decapping Pin: The decapping pin is manufactured from hardened steel, making it resistant to bending or breaking even when depriming cases with crimped primer pockets, common in once-fired military brass.
- Quick-Release Locking Retainer Spring: The retainer spring removes in seconds without tools, making die disassembly and cleaning straightforward during routine bench maintenance.
- Standard 7/8"-14 (22.2mm) Thread: Fits all standard single-stage, turret, and progressive reloading presses using the universal 7/8"-14 die thread specification.
- Calibre Compatibility: Sized for .224 diameter projectiles, compatible with .221 Rem Fireball, .222 Rem, .223 Rem, .222 Rem Mag, 5.6x50 Mag, .219 Zipper, .224 Wby Mag, .225 Win, and .22-250 Rem. Shellholder sold separately.
The Hornady Neck Sizing Die in .22 Cal (.224) is a well-considered tool for the precision-minded handloader who shoots a dedicated bolt-action or single-shot rifle and wants to maximise both case longevity and accuracy potential from their loads. Shellholder not included.
Hornady Shellholder - Suit Hornady Reloading Accessories
$14.99
Introducing the Hornady Shellholder - #1 - Suit Hornady Reloading Accessories, a must-have for any serious reloader. Precision machined from solid steel and heat treated, these shell holders are designed to perform flawlessly for the life of your press. They seamlessly fit all other Hornady accessories, including the Case Trimmer and Hand-Held Priming Tool, making them incredibly versatile. Additionally, Hornady steel shell holders are compatible with most other brands of reloading presses, ensuring you have the flexibility you need. Click here for a chart of shell holders, shell plates and calibers.
Hornady Shellholder - #1 - Suit Hornady Reloading Accessories Features:
- Precision Machined: Our Shell Holders are precision machined from solid steel, ensuring high accuracy and reliability.
- Heat Treated: Each shell holder is heat treated to perform flawlessly for the life of the press, offering long-lasting durability.
- Compatibility: They fit all other Hornady accessories such as the Case Trimmer and Hand-Held Priming Tool, providing versatile use.
- Universal Fit: Hornady steel shell holders also fit most other brands of reloading presses, making them highly adaptable.
- Comprehensive Chart: Click here for a chart of shell holders, shell plates and calibers, ensuring you find the perfect match for your needs.
Hornady Universal Loading Block w Sleeve
$24.99
Hornady Universal Loading Block w Sleeve is a practical reloading bench accessory designed to help keep cases organised, upright and easy to access while handloading. The double-sided loading block is made to suit a wide range of common case heads, including magnum, .308 and .223 size cases, making it a versatile option for reloaders working across multiple calibres. With a 50 round capacity and durable red plastic construction, it helps keep your bench cleaner and more efficient during case prep, charging, inspection and bullet seating tasks.
Hornady Universal Loading Block w Sleeve Key Features
- Universal Reloading Design: Made to suit a wide range of common rifle and pistol case sizes.
- Double-Sided Block: Reversible design helps accommodate different case head sizes.
- 50 Round Capacity: Holds up to 50 cases for organised batch reloading.
- Multi-Calibre Compatibility: Suitable for magnum, .308 and .223 size case heads.
- Bench Organisation: Keeps cases upright and neatly arranged through different reloading stages.
- Fast-Load Stand Compatible: Works with the Hornady Fast-Load Powder Measure Stand to help reach every case in the block.
- Durable Plastic Construction: Built from red plastic for regular reloading bench use.
- Handloader Essential: Useful for case prep, powder charging, visual inspection and bullet seating workflows.
Hornady Universal Loading Block w Sleeve is a handy and versatile loading tray for reloaders wanting a clean, organised bench setup with support for common magnum, .308 and .223 size case heads.
Hornady Modified Case - .223 REM
$16.99
The Hornady Modified Case - .223 REM serves as an invaluable aid for those looking to enhance their reloading accuracy. Tailored to work seamlessly with Lock-N-Load Precision gauges, these cases provide a stable platform for precise alignment within your firearm's chamber. The fine thread design promotes consistent stability, while the perfectly round neck allows for effortless and concentric bullet insertion. This thoughtful blend of features is ideal for hunters who strive for precision in their shooting experiences, ensuring every round performs at its best.
Hornady Modified Case - .223 REM Features:
- Compatibility: Specially modified to work with Lock-N-Load Precision gauges.
- Attachment: Features a fine thread for secure attachment to gauges.
- Alignment: Ensures perfect squareness for precise alignment in the chamber.
- Neck Design: Neck is made perfectly round for optimal bullet fit.
- Bullet Insertion: Slightly opened neck allows standard diameter bullets to slip in effortlessly.
- Concentricity: Designed to ensure concentric bullet seating for precise results.
- Durability: Constructed for repeated use without loss of precision.
- Ease of Use: Simple to attach and detach from gauges for quick adjustments.
- Precision Engineering: Crafted to meet high standards for accuracy in shooting applications.
- Versatility: Suitable for a variety of shooting needs and preferences.
Hornady Collet #2 .22 CAL
$39.99
Unleash the potential of the Hornady Collet #2 .22 CAL for your reloading needs. This indispensable tool is designed to work seamlessly with the Cam-Lock Bullet Puller, ensuring a smooth and efficient bullet removal process. Ideal for precision and reliability, it’s perfect for hunters looking to fine-tune their ammunition. Whether you're adjusting loads or salvaging components, this collet offers the versatility and ease of use that every reloader desires.
Hornady Collet #2 .22 CAL Features:
- Compatibility: Works with the Cam-Lock® Bullet Puller.
- Efficiency: Quickly and easily removes bullets from cartridges.
- Durability: Made from high-quality materials for long-lasting use.
- Precision: Ensures accurate and clean bullet removal.
- Ease of Use: Simple to operate, making it ideal for both beginners and experienced users.
GUNS AND AMMO CAN NOT BE SHIPPED, PLEASE VISIT ONE OF OUR STORES TO PURCHASE.
Shipping Rates & Options
We offer straightforward flat rate shipping options:
- Standard Shipping - $14.99: Generally delivered within 2 - 4 days of dispatch to metropolitan areas. Please allow an extra 1 - 2 days for us to pick and pack your order. You will be given tracking details to monitor your order's journey.
- Jump The Queue Shipping - $19.99: For those in a hurry, orders placed before 2 pm AEST will be packed and dispatched on the same day. If placed after 2 pm AEST, they'll be dispatched the next business day. Tracking details will be provided for your convenience. Please note that this is not express shipping, for express shipping quotes please contact our team at 07 3391 2299.
Additional Shipping Charges
- Bulky Items Surcharge - $39.99: Certain items due to their size and nature require an additional fee for shipping. Bulky items include, but are not limited to, Firearms, Compound Bows, and Spearguns.
- Extra Bulky Item Surcharge - $89.99:Certain items due to their size and nature require an additional fee for shipping. Extra Bulky items include, but are not limited to, Firearm Safes, Treestands and Feeders.
- Shipping Insurance - $4.99: For added peace of mind, avail of our Australia-wide shipping insurance to safeguard your order during transit.
Shipping Specifics
Please note:
- Prices mentioned apply mainly to mainland Australia. Offshore islands and territories might face extra delivery costs. In such instances, our customer service will reach out to you.
- For larger or bulkier orders which necessitate road transport, delivery times might extend.





