Sabre Cantilever Mount
Sabre Cantilever Mount
- Ring Diameter: 30mm
- Mount Style: Cantilever
- Base Compatibility: Weaver (will fit Picatinny)
- Material: Aluminum 6061-T6
- Finish: Matte black anodised
- Weight: 174 grams
- Length: 110mm
- Ring Torque Max: 16-18 lbs
- Base Torque Max: 30-35 lbs
- Height: 39mm (1.54in)
When your optic needs to sit further forward than a standard ring set allows, the Sabre Cantilever Mount delivers a clean, purpose-built solution. Machined from aerospace-grade 6061-T6 aluminium and finished in a matte black hard anodise, this one-piece mount is built to handle the rigours of repeated field use and the punishment of high-recoil centrefire platforms. The cantilever design offsets the optic 60.42mm forward of the base, giving you the eye relief you need without sacrificing receiver access for charging handles or rear sights. If you're running a 30mm tube scope on a semi-auto or bolt rifle and struggling to dial in a comfortable shooting position, this mount is the straightforward fix.
Sabre Cantilever Mount Key Features
- Ring Diameter: Sized for 30mm scope tubes, the most common tube diameter on modern centrefire hunting and target optics.
- Cantilever Offset: The forward section shifts the optic 60.42mm ahead of the base, allowing proper eye relief on platforms where receiver length or stock geometry would otherwise force a compromised head position.
- Mount Height: At 39mm (1.54in) centreline height, this mount clears most bolt handles and AR-style flat-top receivers without additional shimming or modification.
- Base Compatibility: Fits Weaver-pattern rails and is also compatible with MIL-STD-1913 Picatinny rails, covering the majority of modern rifle platforms.
- Material: Constructed from 6061-T6 aluminium, a high-strength alloy widely used in precision mounting hardware for its excellent strength-to-weight ratio and corrosion resistance.
- Finish: Matte black hard anodised surface provides a non-reflective, wear-resistant coating suitable for extended outdoor use in variable conditions.
- Weight: At 174 grams, the one-piece construction adds minimal weight while delivering significantly more rigidity than a comparable two-piece ring set.
- Overall Length: 110mm total length provides a stable, two-point contact footprint along the rail, reducing flex and improving zero retention under recoil.
- Torque Specifications: Ring screws torque to 16-18 inch-pounds and base screws to 30-35 inch-pounds, giving you precise installation references to avoid under or over-tightening.
- One-Piece Construction: A single-body design maintains consistent alignment between ring centres without the tolerance stacking that can occur with separate rings, keeping your optic true to bore.
- Recoil Resistant: Secure locking screws and the rigid one-piece body resist movement under repeated recoil, maintaining zero session to session.
The Sabre Cantilever Mount is a no-nonsense, well-specified piece of mounting hardware that suits a wide range of hunting and range shooting applications. Whether you're dialling in a semi-auto for pig hunting or setting up a dedicated range rifle, it gives you a solid, repeatable platform to build on.
What scope tube diameter is this mount designed for?
The Sabre Cantilever Mount is designed specifically for scopes with a 30mm tube diameter. If your scope has a different tube size, such as 1 inch or 34mm, this mount won't be compatible. Always check your scope's tube diameter before purchasing to ensure a proper, secure fit.
What rail system does this mount fit?
This mount is designed for Weaver-style bases and will also fit Picatinny (MIL-STD-1913) rails, which are the most common rail systems found on AR-style and tactical rifles. If your firearm has either of these rail types, the Sabre Cantilever Mount should be compatible.
Why choose a cantilever mount over a standard two-piece ring setup?
The cantilever design shifts your scope approximately 60mm forward of the rail, giving you correct eye relief without crowding the receiver area. This is especially useful on AR-style rifles where the charging handle or rear backup iron sights need clearance — something a standard inline ring mount can't easily accommodate.
What are the recommended torque settings when fitting this mount?
Sabre recommends torquing the ring screws to 16–18 inch-pounds and the base screws to 30–35 inch-pounds. Using a torque wrench helps prevent over-tightening, which can damage your scope tube, while ensuring the mount stays firmly secured against recoil during use.
GUNS AND AMMO CAN NOT BE SHIPPED, PLEASE VISIT ONE OF OUR STORES TO PURCHASE.
Shipping Rates & Options
We offer straightforward flat rate shipping options:
- Standard Shipping - $14.99: Generally delivered within 2 - 4 days of dispatch to metropolitan areas. Please allow an extra 1 - 2 days for us to pick and pack your order. You will be given tracking details to monitor your order's journey.
- Jump The Queue Shipping - $19.99: For those in a hurry, orders placed before 2 pm AEST will be packed and dispatched on the same day. If placed after 2 pm AEST, they'll be dispatched the next business day. Tracking details will be provided for your convenience. Please note that this is not express shipping, for express shipping quotes please contact our team at 07 3391 2299.
Additional Shipping Charges
- Bulky Items Surcharge - $39.99: Certain items due to their size and nature require an additional fee for shipping. Bulky items include, but are not limited to, Firearms, Compound Bows, and Spearguns.
- Extra Bulky Item Surcharge - $89.99:Certain items due to their size and nature require an additional fee for shipping. Extra Bulky items include, but are not limited to, Firearm Safes, Treestands and Feeders.
- Shipping Insurance - $4.99: For added peace of mind, avail of our Australia-wide shipping insurance to safeguard your order during transit.
Shipping Specifics
Please note:
- Prices mentioned apply mainly to mainland Australia. Offshore islands and territories might face extra delivery costs. In such instances, our customer service will reach out to you.
- For larger or bulkier orders which necessitate road transport, delivery times might extend.